“Tiny Orbo Replication 3″ update

After some thought, I will most likely use 36 AWG copper magnet wire instead of 26 AWG for technical reasons. Basically, the wire will be close to the core since I've removed the terribly thick Metglas plastic casing. Although I will coat the cores with a thin coating of Liquid Paper. The 26 AWG is too thick, and will cause a thin layer of the core to be magnetized in a waving up and down fashion. Using 36 AWG will significantly smooth out the applied inner field at the cores surface.

To save time, I'll make a wire bundle consisting of numerous strands of 36 AWG magnet wire. Lets say there's ten strands per bundle. That means every wire loop I make is really ten loops. So that will help speed up the core winding time. Also, more importantly it will allow me to connect all of the strands in parallel. If they were all connected in-series, then the "Tiny Orbo Replication 3" would require hundreds of voltages to run.

Related Posts

1. “Tiny Orbo Replication 3″ update
2. “Tiny Orbo Replication 3″ design details
3. “Tiny Orbo Replication 3″ update
4. “Tiny Orbo Replication 3″ update 17
5. “Tiny Orbo Replication 2″ update 8
6. “Tiny Orbo Replication 3″ update
7. “Tiny Orbo Replication 4″ update 18
8. “Tiny Orbo Replication 3″ update
9. “Tiny Orbo Replication 4″ update 17
10. “Tiny Orbo Replication 3″ update
11. “Tiny Orbo Replication 3″ update 22
12. “Tiny Orbo Replication 3″ update
13. “Tiny Orbo Replication 4″ update 23
14. “Tiny Orbo Replication 4″ update 15
15. “Tiny Orbo Replication 3″ update
16. “Tiny Orbo Replication” replication update
17. “Tiny Orbo Replication 4″ update 16
18. “Tiny Orbo Replication 3″ update 27
19. “Tiny Orbo Replication 3″ update
20. “Tiny Orbo Replication 3″ update 20
21. “Tiny Orbo Replication 2″ major update
22. “Tiny Orbo Replication 3″ update 24
23. “Tiny Orbo Replication” tips
24. “Tiny Orbo Replication” replication update
25. “Tiny Orbo Replication” update
26. “Tiny Orbo Replication” tip
27. “Tiny Orbo Replication 4″ update 9
28. “Tiny Orbo Replication 2.5″
29. “Tiny Orbo Replication 4″ update 8
30. “Tiny Orbo Replication 2″ update 6
31. “Tiny Orbo Replication 4″ update 1
32. “Tiny Orbo Replication 3″ update 18
33. “Tiny Orbo Replication” tip
34. “Tiny Orbo Replication 2″ update 10
35. “Tiny Orbo Replication” tip
36. First replication attempt of “Tiny Orbo Replication” update
37. “Tiny Orbo Replication 3″ update
38. “Tiny Orbo Replication 4″ update 10
39. “Tiny Orbo Replication 3″ update 26 – the end?
40. “Tiny Orbo Replication 4″ update 25
41. “Tiny Orbo Replication 2″ update 11
42. “Tiny Orbo Replication 4″ update 24
43. “Tiny Orbo Replication 3″ update 19
44. “Tiny Orbo Replication 4″ update 28
45. “Tiny Orbo Replication 4″ update 6
46. “Tiny Orbo Replication 4″ update 4
47. “Tiny Orbo Replication 3″ update
48. “Tiny Orbo Replication 3″ update 21
49. “Tiny Orbo Replication 3″ update
50. “Tiny Orbo Replication 4″ update 27
51. Replicate “Tiny Orbo Replication”
52. “Tiny Orbo Replication 4″ update 2
53. “Tiny Orbo Replication” replication page update
54. “Tiny Orbo Replication 4″ update 19
55. “Tiny Orbo Replication” & Hue device update
56. “Tiny Orbo Replication 3″ update
57. “Tiny Orbo Replication” update
58. “Tiny Orbo Replication 2″ update 9
59. “Tiny Orbo Replication 4″ update 7
60. “Tiny Orbo Replication 4″ update 22
61. “Tiny Orbo Replication 2″ update 5
62. “Tiny Orbo Replication 4″ update
63. “Tiny Orbo Replication 2″ update 4
64. “Tiny Orbo Replication 2″ update 3
65. “Tiny Orbo Replication 4″ update 21
66. “Tiny Orbo Replication” update
67. “Tiny Orbo Replication 2″ update
68. “Tiny Orbo Replication 3″ update
69. “Tiny Orbo Replication” update
70. “Tiny Orbo Replication 4″ update 26
71. “Tiny Orbo Replication 4″ update 20
72. “Tiny Orbo Replication 4″ update 14
73. “Tiny Orbo Replication 2″ update 7
74. “Tiny Orbo Replication 4″ update 13
75. “Tiny Orbo Replication 4″ update 12
76. “Tiny Orbo Replication 4″ update 11
77. “Tiny Orbo Replication 4″ update 3
78. “Tiny Orbo Replication 3″ update 28
79. “Tiny Orbo Replication 3″ update 23
80. “Tiny Orbo Replication 2″ update
81. “Tiny Orbo Replication 3″ update 25 – YouTube
82. Best method to make “Tiny Orbo Replication”
83. “Orbo replication” update
84. Replicating “Tiny Orbo Replication 4″ update
85. Today’s “Tiny Orbo Replication” update
86. Video of the late “Tiny Orbo Replication 4″
87. First replication attempt of “Tiny Orbo Replication”
88. “Tiny Orbo Replication” slow start
89. Parts list for new “Self-running Orbo Replication”
90. Third “Tiny Orbo Replication 4″ replicator
91. Holy Grail Tiny Orbo Replication
92. “Tiny Orbo Replication” replicators
93. “Tiny Orbo Replication 2″ runs on 48 microwatts!
94. “Tiny Orbo Replication 3″ update
95. “Tiny Orbo Replication 3″ update
96. Second replication attempt of “Tiny Orbo Replication”
97. Circuit for “Tiny Orbo Replication 2″
98. “Tiny Orbo replication” 170% efficient
99. Building “Tiny Orbo Replication 3″
100. Today’s Tiny Orbo Replication work